Locations : Houston, Texas
Manufacturing Capacity:
Three ERW weld mills producing mechanical and structural tubing from 1/2" OD through 4" OD in rounds, 3/4" x 3/4" through 3" x 3" in squares and 1/2" x 1" through 4" x 3" in rectangles. These sizes are available in material thickness from .035" through .154" in cold roll, hot roll pickled and oiled, and hot roll black steels.
Capabilities:
Full cut to length abilities with three re-cut machines and
two production saws. Stocking inventory of 1" sq through 3 "
sq and comparable rectangles.
Typical Manufacturing Specifications:
- ASTM A513
- ASTM A500
Rail, truck, piggyback
Facility Description:
175,000 square feet of covered manufacturing facility located on 16 acres on the near northwest side of Houston only 10 minutes from downtown.
Northwest Pipe Company
6307 Toledo Street
P.O. Box 2002
Houston, Texas 77252
Telephone: 713-863-4300
Toll free: 800-369-5009
Fax: 713-863-4313
Group Vice-President, Operations
Greg Wilck
Operations Manager
Bob Place
Quality Assurance Manager
Scott Monte
Sales
Ray Kisiel
Steve Shugart